Continuous Disinfection NPBI
Continuous Disinfection of Indoor Air and Surface
Through NPBI
NPBI produces ions to clean indoor air
Better Air Through Science
GPS can be installed in any system in any building.
1. Significantly reducee airborne particulates, odors and pathogens, including SARS-CoV-2
2. Lower energy bill by reduciing outdoor air circulation by 30%
3. Be installed in any type of HVAC
Our patented technology is particularly effective against pathogens- such as mold, viruses and bacteria. As ions produced via the NPBI system come into contact with airborne pathogens, they engage with surface proteins and render them inactive.
GPS-FC48-AC™
An automatic self-cleaning, lightweight NPBI system that handles up to 4,800 CFM or 12 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors.
GPS-DM48-AC™
The world’s first automatic self-cleaning, duct mounted, lightweight NPBI electronic air cleaner. The maintenance free unit is designed for indoor or outdoor duct mounting and can handle up to 4,800 CFM or 12 tons.
GPS-FC24-AC™ / S™
An automatic self-cleaning, lightweight NPBI system that handles up to 2,400 CFM or 6 tons. Designed for multiple mounting options including fan inlet, interior duct walls or floors.
GPS-iRIB® 18/36
The GPS-iRIB is available in 18” and 36” lengths. They are made from a flexible chemical, heat and cold resistant Kapton® material containing a circuit with special carbon fiber ion emitters soldered into the circuit traces. This mechanism is engineered to deliver the highest level of ionization with the least amount of energy in the most compact size. Designed for 3200 CFM or 8 tons.
GPS-iMOD®
The GPS-iMOD is a modular NPBI system that is field assembled to any length up to 240 inches in 6-inch increments. The fiberglass composite and carbon fiber GPS-iMOD can be mounted in various environments. It can treat 50–250 CFM per inch of bar, depending on the application.
GPS-FC-3-BASTM
GPS-iMEASURE™
The GPS-iMEASURE is the first commercially available ion detector that can be permanently mounted in the space to measure ion levels in real time and report back to a BAS.
GPS-iMEASURE-D™
The GPS-iMEASURE-D ion detector is permanently mounted in the duct downstream of any GPS ionization device. It measures ion levels in real time and reports back to a BAS. It includes three sensitivity levels: 20,000/200,000/2,000,000 ions/cc/sec that can be set based on the application and in-duct location.
IONIZATION SYSTEM QUICK SELECTION GUIDE
| GPS Model | Install Locations | Cooling Capacities | Input Voltage | Auto Clean |
|---|---|---|---|---|
| GPS-iMODTM | Duct, In the Air Flow, Between Evaporator & Coil Filter | 0-4800+ CFM / 1-15+ Tons | 24/120/208-240 VAC | NO |
| GPS-DM48-ACTM | Duct, In the Air Flow | 0-4800 CFM / 1-12 Tons | 24–240 VAC | YES |
| GPS-FC48-ACTM | Fan Inlet, In the Air Flow, Zone Diffuser | 0-4800 CFM / 1-12 Tons | 24–240 VAC | YES |
| GPS-FC24-ACTM | Fan Inlet, In the Air Flow, Zone Diffuser | 0-2400 CFM / 1-6 Tons | 24–240 VAC | YES |
| GPS-iRIB-18TM | In the Air Flow | 0-2400 CFM / 1-6 Tons | 110–240VAC | NO |
| GPS-iRIB-36TM | In the Air Flow | 0-4800 CFM / 1-12 Tons | 110–240VAC | NO |
| GPS-FC3-BASTM | Fan Inlet, In the Air Flow, Zone Diffuser | 0-2400 CFM / 1-6 Tons | 24VAC | NO |
A PROVEN PROCESS TO CLEAN THE AIR
Top-Flight Technology
GPS’ technology is the only active air purification system that has been designed and approved to operate in commercial and private aircraft. Aviation applications require passing the stringent RTCA DO-160 test proving the technology does not generate EMF, line noise or interfere with the avionics in any way. GPS’ technology is used in many healthcare applications and will not cause interference with the imaging equipment.
Third-party certifications confirm
UL 2998 Ozone-Free Validation
250k + Satisfied installations
Office
11947 Florence Ave, Unit 6
Santa Fe Springs, CA 90670
Hours
Mon - Fri : 9am – 5:30pm
Sat & Sun: Closed
License : C10 1045237
follow
Privacy Policy
Web Acceibility